We also carry out press processing of non-ferrous metals.
We have a wide range of press machines, including servo presses and link motion presses.
We perform punching processing on rectangular or rolled materials according to the conditions.
Depending on the material and shape, bending and drawing processes are also possible.
setup
setup
IoT System
The process of attaching and detaching the die to the press and preparing for processing is called "setup."
This die setup is a very important task for improving product quality.
In addition to mounting and dismounting dies, we also set the processing conditions of the press machine and the automatic transfer machine.
In addition, setup time is constantly monitored using our in-house IoT system, enabling us to achieve both high precision and reduced setup time.
Press working
Servo Press Machine
Processed product
Unlike general press processing, our method has the following features.
- Capable of achieving high surface roughness on cross sections through near full shear press processing
・We can also handle thin non-ferrous metal materials (we have experience processing 0.2mm thick stainless steel).
*Please feel free to contact us for processing of other thicknesses.
・The manufacturing line does not use processing oil, making it gentle on the product and the global environment.
- High-speed, high-precision transport using twin roll feeder
・We are also developing press processing of magnetic materials such as amorphous metals (thickness 0.025 mm)
Lamination
Laminator
Processed product
Lamination is the process of attaching an adhesive (adhesive tape) to non-ferrous metal using a laminator machine.
The sample photo shows an aluminum plate with protective adhesive tape attached.
Of course, it is also possible to attach to metals other than aluminum, and to attach to one or both sides.
After lamination, cutting (shirring) and pressing processes are often carried out.
