Contribute to society through manufacturing and human resource development.
 
Yamada Seisakusho, which was founded in the dial processing of automobile meters, is a leading non-metal resin press company that mainly processes bakelite, and has delivered a large number of products such as resin stamped parts and insulator processed parts to the automobile industry. There are not many companies in Japan that mainly manufacture insulating parts such as bakelite processing, but while taking advantage of this, we are not content with domestic demand and are considering globalization such as overseas transmission. We don't forget to take on challenges and take a variety of approaches to meet the diversifying needs of our customers. We will become an "indispensable company" not only for Japan but also for the world. It has been 66 years since our founding, and we will continue to be a company that can contribute to our customers by responding to the needs of the times with our technological capabilities and know-how.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Message from our CEO

   CEO Shinichiro Yamada
Taking advantage of our superiority in technology and know-how
 Becoming an “Indispensable Company”
 
Yamada Seisakusho was founded in 1955 as a dial processing company for automobile meters. As a leading company in non-metallic resin presses, mainly processing bakelite, Yamada Seisakusho supplies a large number of products such as resin pressed parts and insulator processed parts to the automobile industry. I have delivered.Bakelite processing uses a variety of materials, including paper and cloth base materials, as well as our mainstay glass base materials, and is also used in automotive electrical and electronic equipment parts, and in recent years, electric vehicle parts. We appreciate your continued patronage.
There are not many companies in Japan that mainly manufacture insulation parts such as bakelite processing, but while making the most of its superiority, we are not content with domestic demand, and are also considering globalization, such as sending overseas.Don't forget to take on challenges and tackle the diversifying needs of our customers with a variety of approaches.And to become an indispensable company not only in Japan but also in the world.In the 6 years since our founding, we will continue to move forward as a company that can contribute to our customers by responding to the needs of the times with our technological capabilities and know-how.

Company Overview

Company Name
Yamada Seisakusho Co., Ltd.
Location
〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
Phone
0566-21-1240
FAX
0566-21-7851
CEO
CEO Shinichiro Yamada
Established
1955/04/01
Capital
1,000 million yen
Employees
52 people
Business contents
Precision small press parts and mold manufacturing

History

1955.4
Founded primarily as a manufacturer of automobile meter dials
1959.4
Established Yamada Manufacturing Co., Ltd.
1960.5
Started insulator press processing for electrical components
1979.5
Reorganized as a stock company.
1979.7
Capital increase to 800 10,000 yen
1980.3
Expanded machine factory
1985.2
Established Ogakie factory
1989.3
Headquarters building new construction
1992.6
Increased the capital to 1,000 million yen.
1994.7
Established the second machine factory.
1998.9
Increase in mold manufacturing facilities
2000.8
Additional parking lot
2002.8
Established mold warehouse
2003.2
Acquired ISO9001 certification (headquarters only)
2003.12
Acquired Eco Stage 1 certification (headquarters only)
2004.8
Acquired factory site in Otsuzaki, Ogakie-cho
2005.5
Relocated the head office factory to Otsuzaki, Ogakie-machi.
2008.2
Acquired ISO14001 certification (headquarters only)
2019.2
Aichi brand company certification
TEL. 0566-21-1240
We look forward to hearing from you by phone.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Inquiries

■ Please read the Personal Information Security Policy and fill out the inquiry form only upon agreement.
■ Be sure to enter a valid phone number (home or mobile phone) in the phone number field.
■ It may take time for us to reply, so please contact us by phone if you are in a hurry.
■ Please check your settings (spam settings), etc. so that you can receive reply emails.
■ If you do not receive a reply from us, we apologize for the trouble and ask that you please contact us again.

Contact Form

Company Name
Example) 〇〇〇 Co., Ltd.
Name  ※Required
Example: Taro Yamada
Spelling  ※Required
Example) Taro Yamada
Address
Postal Code 
Phone  ※Required
Example) 012-345-6789 * Mobile phones are available
FAX
Example: 012-345-6789
E-mail address  ※Required


* Re-enter for confirmation
Message  ※Required
Desired Reply
Inquiry item  ※Required
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Copyright

  1. Individual information (characters, photos, illustrations, etc.) posted on this website is subject to copyright. The entire website is also subject to copyright as an edited work, both of which are protected by the copyright laws and international treaties of each country.
  2. All or a part of the contents of this website can be cited, reprinted or copied by specifying the source in an appropriate manner as an act permitted under the Copyright Act, such as private use or quotation. However, this does not apply if there is a note such as “No reproduction without permission”.
  3. All or part of the contents of this website cannot be modified without permission.

Disclaimer

  1. When posting information on this website, we make every effort to ensure the accuracy of the information, but technically and legally incomplete descriptions and typographical errors may be included. We are not responsible for any actions that users perform using the information on this website.
  2. We are not responsible for any damage caused to users due to the suspension of services on this website due to maintenance of this website, fires, power outages and other natural disasters and acts of force such as viruses and third party interference. We ask for your understanding.
  3. Please download and install browser software and various tools based on your responsibility. We are not liable for any damages or troubles that may occur during the download and installation.

About the links

As a general rule, links to this website are free, so there is no need to contact us when linking. However, please be aware that we may ask you to delete the link if the intention of misuse is obvious or the content of the link source violates laws or is against public order and morals.
 
Please refrain from displaying this website in the frame, as it may cause misunderstandings.

Others

Please note that the contents of this website are subject to change or deletion without notice.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Personal Information Security Policy

Yamada Seisakusho Co., Ltd. (hereinafter referred to as "our company") considers the trust of our users to be our number one priority, and we are committed to handling information related to individual users in an accurate and confidential manner. We believe that this is an important responsibility for our company.For this reason, we have established a "Privacy Policy" regarding the personal information of our users, and we will ensure that all employees and affiliated companies are thoroughly aware of how to handle personal information.Its contents are as follows.In addition, regarding the personal information already held and used by our company, we will handle the personal information of users according to this policy.

Privacy Policy

(1) Acquisition of personal information
The Company shall collect personal information by lawful and fair means. When asking the user to provide personal information, the Company shall disclose the purpose of collection and the details of use in advance and within the scope of our legitimate business, as far as necessary to achieve that purpose, the Company shall collect personal information.
 
(2) Use and sharing of personal information
We use the personal information collected by the Company within the scope of obtaining the consent of the person who received the personal information and within the range according to the purpose of collection. Regarding the purpose of use, of the following "range of purpose of use", we will use items necessary for achieving the purpose within the scope of our legitimate business.
● About the scope of the purpose of use
・ When you contact for business
・ When providing information on products and services handled by the Company
・ When responding to inquiries or requests from users
・ In the case of notifying the user in advance and having obtained their consent
● Use for purposes other than the above
If the Company needs to use the user's personal information for purposes other than the above, the Company shall obtain the user's consent to such use, unless permitted by laws and regulations.
 
(3) Provision of personal information to a third party
The Company do not provide your personal information to third parties without your consent. However, this does not apply if there are special circumstances such as legal obligations that the Company should obey due to laws and other rules applicable to personal information.
 
(4) Procedures for disclosure and correction of personal information
If you would like to inquire, correct, or delete the personal information provided by the user, please contact the contact point for inquiries. Unless it is confirmed that the request was made by the user himself, except in the case where the request causes a significant hindrance to the business of the Company, the personal information of the user within a reasonable period will be disclosed, corrected and deleted.

Compliance with laws and regulations regarding the protection of personal information

We comply with personal information protection laws and regulations that apply to our personal information. In addition, this policy will be determined by the laws and other standards of Japan. This policy sets out our basic policy regarding the handling of personal information, and we strive to protect personal information based on laws and regulations such as the Personal Information Protection Law in accordance with this policy.

About safety management measures for personal information

We will protect personal information from unauthorized access, loss, destruction, falsification, leakage, etc. of personal information, maintain a management system to ensure accuracy and safety, and implement appropriate security measures in addition to restricting outsiders from entering the office handling personal information, conducting education and awareness-raising activities for all officers and employees involved in the protection of personal information of the Company, as well as assigning a manager to appropriately manage personal information.

About continuous improvement

The Company will continuously review and improve our efforts to protect personal information in order to respond to changes in laws and regulations, handling methods and environmental changes that must be followed in Japan.

Contact Us

Inquiries regarding the handling of personal information are accepted at the following counter.
 
[Window for Privacy Policy]
≪Yamada Seisakusho Co., Ltd.≫
〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL: 0566-21-1240 FAX: 0566-21-7851

Use of cookies and web beacons

This site uses technologies such as “Cookies” and “Web Beacons” to obtain access information for users. None of the information obtained by these methods can identify an individual.
If you use this site with a setting that does not accept cookies in your browser or a setting that does not display images, some of the functions provided on the website may not be available.

About using Google Analytics

This site may use Google Analytics. Google Analytics collects access information to this site using cookies. For information on how to collect and use access information,Google Analytics Service Terms of Serviceas well as the Google Privacy Policy.
Refer to the following page for details.
https://www.google.com/intl/ja/policies/privacy/partners/
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Thank you for your contact this time.
 
We will contact you after confirming the contents, so please be patient.
If you have any other questions, please feel free to contact us.
 
If there is no email reply after a few days, normal processing is not possible.
Please contact us again from the form, or contact the following contact information.
 
Yamada Seisakusho Co., Ltd. Tel: 0566-21-1240
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Thank you for contacting us.


We will reply to your email within the same day to the next business day.If you do not receive a reply from our shop, please contact us. We apologize for the inconvenience.

TEL: 0566-21-1240 / FAX: 0566-21-7851

In addition, the following causes are also possible.
 
-----------------------------------------------------------------------
■ When using free mail
If you use free mail, such as gmail.com/hotmail.com/yahoo.co.jp, you may be restricted from receiving mail on the server that provides the free mail address. Even if there is no problem, it may not be received. If you do not receive an e-mail from our store, please check your junk mail box once.
-----------------------------------------------------------------------
■ Depending on the settings of your email software
Depending on the settings of your email software and security software, emails may be deleted automatically. Please be sure to check the e-mail from our store in the trash.
-----------------------------------------------------------------------
■ If your email address is incorrect
We ask that you confirm your e-mail address and make sure that it is correct.
-----------------------------------------------------------------------
■ If you enter your mobile email address
There is a possibility that "Specify Domain" is set in the email reception settings on the mobile phone. Please check once again whether it is set to receive emails from your computer.
-----------------------------------------------------------------------
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
The transmission is complete.

* If you do not receive a reply after a few days,
Sorry to trouble you, but please let us know at the following.

Yamada Seisakusho Co., Ltd./TEL: 0566-21-1240
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Parts introduction

○○○○

sample text
●●●●●●●●●

○○○○

sample text
●●●●●●●●●

○○○○

sample text
●●●●●●●●●
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
  We at Yamada Seisakusho specialize in non-metal presses.We have many technologies that other companies cannot do, and we have earned the trust of many customers.
In particular, the core of our technology is the mold, which we can design, manufacture, and maintain in-house.
We have worked with various materials so far, and we have fully incorporated the technology we have cultivated in the past into our small molds.
In addition to processing with molds, we are also good at half-cutting adhesive tapes, pressing using Thomson molds and etching molds (pinnacle molds) that can be processed at low cost and in a short delivery time. We will respond flexibly to your requests.
 
 If you have any problems with processing non-metallic materials, please feel free to contact us.
We will manufacture products that satisfy you in terms of delivery time and cost.
 
  Our molds use a unique manufacturing method, and we are challenging materials that are said to be difficult to process.
  In addition, in order to respond to a wide range of customer needs, our experience and vast amount of data are the source of our strength.
Our presses range from 4t to 15t.
We are good at punching precision small products, and bending and drawing are also possible.
 Thomson type (Vic type).We are able to offer lower costs and quicker delivery times than molds.Suitable for punching adhesive materials and film sheets.
Difficult points include difficulty in precision dimensions, hard materials cannot be punched, durability is low, and it is difficult to handle multiple lots.
In that case, it is possible to reduce the total cost by replacing it with a mold.
 The use of NC drilling machines enables high-speed and efficient production of holes that require a rough cross-section.
 
 
  Half cut is suitable for punching film sheets with adhesive.After punching, the finished product is rolled.
 
 
  Our measuring equipment.We manage the quality with a strict eye to meet the strict requirements of our customers.
 
 
 
  This is our wire cutting machine.In order to create a mold with high precision, we apply electric current to the copper wire and discharge it for processing.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
  We, Yamada Seisakusho Co., Ltd., have earned the trust of many customers as a leading company in non-metallic resin presses due to the uniqueness of our field.The products are mainly used for automotive electrical parts and electronic equipment parts.
  We can handle everything from small-scale production such as prototypes to large-scale lot production, and from thin films to thick laminates.In addition, we also manufacture molds in-house, so we can flexibly respond to customer requests in terms of delivery and cost.
  We are willing to take on the challenge of processing materials that we have never processed before, so if you have any problems with processing non-metallic materials, please do not hesitate to contact us.
  The main materials used are paper phenolic resin laminates, cloth phenolic resin laminates, glass phenolic resin laminates, glass epoxy resin laminates, pressboards, and other films such as PP and PET.
  For detailed product shape, please refer to the product photo.

Auto parts

Pressed products of insulators for motors

This is a pressed insulator used for small to medium-sized motors in automobiles.
The material is a glass phenolic resin laminate (Bakelite) composed of glass fiber and resin.
・Since it is an insulator, processing oil cannot be used.
・Dust containing glass fiber is generated (Since quartz is not contained, there is no effect on the human body.)
・Processing oil cannot be used, and since it contains glass fibers, equipment and molds wear out quickly.
・Phenolic resin and glass fibers are not compatible with each other, and delamination (peeling) easily occurs during punching.
There is poor workability such as.
Based on our many years of unique technology, we can determine the wear resistance and maintenance cycle of molds and equipment, and deliver products that require strict accuracy with stable quality.

Pressed products of insulators for motors

This is a press processed product of insulators used for automobile motors.
The material is a special hard fiber board composed of environmentally friendly natural materials with wood fiber as the main raw material.
・Since it is an insulator, processing oil cannot be used.
・Composed of high-density wood fiber, equipment and molds wear quickly due to paper dust, etc.
・Interlayer delamination (peeling) is likely to occur during punching.
There is poor workability such as.
Based on our many years of unique technology, we can determine the wear resistance and maintenance cycle of molds and equipment, and deliver products that require strict accuracy with stable quality.

Pressed products of insulators for motors

This is a pressed insulator used in automobile motors.
A paper phenolic resin laminate (Bakelite) composed of paper fiber and resin as a base material,
・Since it is an insulator, processing oil cannot be used.
・Resin dust containing fibers is generated.
・Phenolic resin and paper fibers are not compatible with each other, and delamination (peeling) easily occurs during punching.
・Cracks will occur if press working is not performed in a high temperature state.
・On the other hand, if the temperature is too high, the removal performance will be deteriorated, such as the hole residue of the waste being stuck.
There is poor workability such as.
Based on our many years of unique technology, we can determine the wear resistance and maintenance cycle of molds and equipment, and also keep the heating temperature constant with dedicated equipment, making it possible to deliver products with strict quality requirements.

Pressed products of insulators for motors

for automobile motorsbrush holder It is a press processed product of insulator used for
The material is a glass phenolic resin laminate (Bakelite) composed of glass fiber and resin.
・Since it is an insulator, processing oil cannot be used.
・Dust containing glass fiber is generated (Since quartz is not contained, there is no effect on the human body.)
・Processing oil cannot be used, and since it contains glass fibers, equipment and molds wear out quickly.
・Phenolic resin and glass fibers are not compatible with each other, and delamination (peeling) easily occurs during punching.
There is poor workability such as.
Based on our many years of unique technology, we can determine the wear resistance and maintenance cycle of molds and equipment, and deliver products that require strict accuracy with stable quality.

Pressed products of nylon material for small motors

This is a pressed nylon material used in small motors for automobiles.

It is often used in areas where requirements such as coaxiality and dimensional accuracy are often strict, and it is a difficult-to-process material that is very prone to burrs during punching.

At our company, we use our own precision molds and high-speed press machines with special specifications that are made up of our unique know-how to enable processing that minimizes burrs.

Pressed products of waterproof packing for small motors

Waterproof packing used for automobile wiper motors.
It is possible to punch a wide range of materials such as oil sheets containing oil and synthetic cork materials made of cork.

Since it is a relatively soft material, it can be processed not only by punching with Thomson and Vic dies, but also with press dies designed by our company.
Our strength is that we can choose between Thomson type and Vic type for prototypes and small lots, and molds for large lots of 1 pieces or more per month.

In addition, it is also possible to laminate a strong adhesive double-sided tape for bonding on the back side for easy assembly, and then punch it out.

Bent products of insulators for motor slots

This is a slot insulator used for motors for automobiles and electrical machinery.
This insulator is used for insulation and heat resistance in the slots (grooves) of motors.

Materials composed of aramid fiber or polyimide film are often used, but require bending for insertion into the slot. (This photo shows aramid fiber)

At our company, there are two types of construction methods: bending with ruled lines (streaks) applied to the material using the Thomson type and Viku type, and automatic bending using a bending die.
We can handle a wide range of requests from prototypes, small lots to large lots.

Insulation cover pressed products / products with double-sided tape for bonding

Insulating covers for converters used in automobiles, especially HV (hybrid), PHV (plug-in hybrid) and EV (electric vehicles).
We can provide various materials, but PET (polyethylene terephthalate) film, which is inexpensive and easy to process, is often used.

In general, Thomson type, Vic type, and etching blade type are used for processing, but accuracy requirements are often severe, and it is impossible to meet the requirements other than etching blade type, and etching blade type has poor productivity. There is a problem.
At our company, we use press dies designed in-house to achieve high productivity with automated machines and an increase in the number of products that can be obtained from materials.

In addition, we attach strong adhesive double-sided tape for bonding for assembly, but we can also process it in-house, and we have also built an inspection machine to prevent mistakes in attaching it, and at the same time we have achieved quality improvement. We are here.

Motor cover

Confected with polypropylene filmWith car motorIt is a lightweight cover to prevent foreign matter mixed.
We process the hole in the bent part and the central hole at the same time, but depending on the shape, it is possible to process using a mold.
In addition, a wide range of prototypes, small lots to large lots can be handled.

Bent products of insulators for motor slots

This is a slot insulator used for motors for automobiles and electrical machinery.
This insulator is used for insulation and heat resistance in the slots (grooves) of motors.

Materials composed of aramid fiber or polyimide film are often used, but require bending for insertion into the slot. (This photo is a polyimide film)

At our company, there are two types of construction methods: bending with ruled lines (streaks) applied to the material using the Thomson type and Viku type, and automatic bending using a bending die.
We can handle a wide range of requests from prototypes, small lots to large lots.
 
 
Half-cut product (the finished product will be rolled)

Pressed product of rubber cover for wire harness

A rubber cover for wire harnesses used for heat dissipation.
At our company, this shape is made by punching using a mold.
Rubber stamping is generally done with Thomson and Vic dies, but we use press dies to pursue precision and efficiency.


Pressed products of insulators for horns

This is a processed product of phenolic resin laminate (Bakelite), which is used for horns and uses fine fabric fibers as the base material.
Quality requirements are high, requiring accuracy on the order of 100 minutes, and the quantity is several hundred thousand pieces, but the molds developed by our company can be delivered with stable quality.

PEEK material pressed products for small motors

Used in automotive power seat motors, etc.It is a press processed product of PEEK material (polyether ether ketone), which is a super engineering plastic material.
It has excellent flame resistance, friction resistance, and abrasion resistance, and is mainly used as a lightweight material for sliding parts.
In recent years, it has attracted attention as a substitute for bearings.

Although it is an expensive material and is prone to burrs during punching, we process it with a design concept that maximizes the number of pieces that can be processed from the size of the original fabric.
We have a track record of 20 to 30% improvement in the number of products compared to other companies, which contributes to cost reduction.
In addition, it is also possible to reduce burrs to the limit by processing with high-precision molds.

Electrical and electronic components

Glass epoxy resin pressed products for inverter motors

Glass-epoxy resin laminate used in inverter motorsis a pressed product.
glass epoxy resin laminateEpoxy resin is impregnated into glass fiber, heat-cured, and shaped into a plate.
This material is an insulator that is often used in printed circuit boards, and is usually processed by cutting, etc., but it is difficult to handle large lots.
Also, the dust generated during cutting contains glass fibers, which significantly shortens the life of cutting tools.

At our company, we use in-house molds for high-precision processing to suppress the generation of processing dust, and we have built a production line that can handle multiple lots and has cost advantages.

Pressed product of insulator for brush holder

This is a processed product of phenolic resin laminated plate (Bakelite), which is used as a base for brush holders (holders that support carbon brushes).

Using the molds developed by us, we are able to perform processing with the precision required by our customers.
Due to the characteristics of the material, it cracks when processed at room temperature, so it is necessary to process at an appropriate temperature.



Press processed products of cellulose nanofiber paper

It is a pressed product of cellulose nanofiber material (commonly known as fiber), which is chemically treated paper as a raw material.

Fiber is a type of industrial paper that is strong, tenacious and hard to break, and has a certain degree of rigidity.
It is an environmentally friendly material that can be surface-treated, can be painted and glued, and decomposes faster than ordinary paper.

Due to its excellent rigidity, toughness, compression resistance, abrasion resistance, heat insulation, electrical insulation, etc., it is used for insulating parts of electrical equipment, various packings, machine parts, etc.

Since it is made of paper, the cross section becomes rough when cut, and the Thomson type and Viku type cannot be inserted due to their toughness.
At our company, we are able to overcome these issues by using molds that we have developed in-house, enabling high-precision, high-speed processing.

Pressed product of mica

It is a pressed product made of mica, which is a natural ore, and has excellent electrical insulation and heat resistance.
This mica is a difficult material to handle due to the following points.
・Because it is laminated, delamination (peeling) occurs due to impact during punching.
・Various changes due to the environment (e.g., exposed to the outside air for a long time ・Delamination is more likely to occur due to humidity)
・Fragile and easily broken

We have a track record of processing plates with a thickness of 1.5 mm, and we can also handle plates with a thickness greater than that depending on the shape.Please feel free to contact us for details.

construction machinery parts

Packing pressed product

Oil packing used for forklift transmissions.
The processing material has excellent oil resistance and sealing properties and is composed of nitrile rubber, butadiene rubber and reinforced cellulose fibres.
It also has short-term heat resistance up to 180°C (350°F).
At our company, processing involves punching these rubber-based materials with high precision and at high speed.

In addition, it is difficult to procure and purchase imported materials, but we can procure such special materials.

Packing pressed product

Oil packing used for forklift transmissions.
The processing material has excellent oil resistance and sealing properties and is composed of nitrile rubber, butadiene rubber and reinforced cellulose fibres.
It also has short-term heat resistance up to 180°C (350°F).
At our company, processing involves punching these rubber-based materials with high precision and at high speed.

In addition, it is difficult to procure and purchase imported materials, but we can procure such special materials.

industrial equipment parts

Housing equipment

Processed products of insulating sheets for delivery boxes

Processed product of insulation film for home delivery boxes.

This is a product born from the solution of the customer's problem.
After listening to the customer's problems and creating samples, we proposed materials and created drawings, processed products, and delivered them.

In response to the need to reduce the battery consumption of delivery boxes, it is possible to dig deeper and propose the shape of the battery box so that it is easy to install on site.

Pressed product of flush sensor for urinals

Pressed film used for faucet sensors in men's urinals.

Since the material is thin and the inner diameter has a shape, it is a product that requires attention to damage such as damage to the die punch during processing.
With our processing technology, it is possible to suppress defects to almost zero.

Aerospace

CFRTP (carbon fiber) pressed products

Lightweight, fatigue-resistant, heat-resistant, and flame-retardant in the aerospace industry
・It is used as a material that excels in LCA (Life Cycle Assessment).
It is a promising material with strong strength and heat resistance, but on the other hand, it is a difficult-to-process material that is not suitable for punching because it is weak in toughness and hard.

However, at our company, we have achieved both precision and productivity by using molds developed in-house and unique processing methods that do not damage the materials.

Others

Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
た ち と し ン ジ し て
 
 
Our main customers are auto parts manufacturers.
In particular, we have had a long relationship with Denso, and we have built a trusting relationship with them to the extent that we disclose our management status as a cooperating company.
This relationship of trust, which did not waver even when we were hit by the recession, has created a solid corporate foundation and is the source of our strength to continue taking on new challenges.
 

Learning from the crisis that followed the bursting of the bubble economy, we took the plunge and reformed our corporate structure, which had been 100% dependent on automobiles.
Utilizing the know-how we had acquired up to that point, we began producing insulators used in personal computers, mobile phones, and lithium batteries.
In this way, we will steadily work on the development of new fields and continue to take on the challenge of new industries.

 

Background of recruitment:
With a sense of mission to produce cutting-edge products, we are constantly thinking about improving quality and productivity as well as responding to the rapidly evolving industrial world.
In order to maintain this pace and make further improvements, I would like to expect your fresh opinions and ideas with flexible ideas.

Notice on recruitment

2022-10-03
We are not currently recruiting general affairs.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

To all of you who apply

Good friends grow into good organizations.
 
We have gained a track record and trust by proposing products and services that our customers want and providing shapes that match their needs.The achievements and trust that we have cultivated are none other than the gift of the power of each and every staff member.
 
In addition, by fully backing up staff, we are focusing on creating an environment that makes it easier to work and improves skills. It is essential for the development of the organization that each and every staff member can play an active part and exert their full potential.
 
In an environment where you can play an active part with peace of mind, challenging tasks are waiting. I want you to be our friend. 
 
CEO Shinichiro Yamada

The kind of person we are looking for

● People with “positiveness” who can think and execute on their own

In recent years, Japan has various issues such as shrinking economy and declining international competitiveness. Not only perform a given job,Positive people who can think and execute on their ownSeeking.

● Person who can perform business with "flexibility"

Society is made up of people working together and working together. Respect and accept the opinions of people with different interpretations of values, directions, facts and things,Flexible person who can work in a teamSeeking.

● People with “extroversion” from a global perspective

Look outside to catch new information and discover new markets and business possibilitiesExtrovert with a global perspectiveSeeking.
* Staff working at overseas branches are excluded.

At work

New employee training
Seminar room
Meeting room
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
We will deliver the real voices of senior staff who are active on the stage of Yamada Seisakusho Co., Ltd. right now.We asked them to tell us about their work, their charms, and what they find rewarding.

Production / Manufacturing Technology / ○○○○○

To the company's stance of pursuing only one products and manufacturing technologyI applied because I felt the future.
 
Joined company: 0000 years / Affiliation: ○○ department
 
At Yamada Seisakusho Co., Ltd., the atmosphere of all the staff is warm and lively, making it a very comfortable place to work.Every day I realize that this is a place where if you have a willingness to learn, you will be recognized.
 
Q. Please tell me the content of your work
I am in charge of machine maintenance in the XX department.Specific work includes aligning machines, changing tools, and checking dimensions.
 
Q. What was the reason or motivation for choosing this job?
Originally I liked making things, and from an early age I was interested in detailed work.When I was a student, I took a tour of a factory that handles automobile parts, and I felt the wonder of the manufacturing industry, so I chose this job.
 
Q. Do you have any memorable episodes or memories that you gained through your work?
Since I usually work only in the factory, I didn't have much image of the shipped products.However, one day I attended the exhibition for the first time when I opened the store, and I was delighted when the customer picked up the product and saw it with great interest.
 
Q. Please tell me how to spend the holidays
Since I belong to a soccer team made by my comrades in the company, I go to practice and games on weekends.It's an important time because I can forget about my daily work and refresh myself.
 
● Send a message to those who are thinking of applying!
It is a company where all employees can work together toward the same goal.We are waiting for someone who can work with us and share the joy of growing up.
● Production / manufacturing technology
Daily Schedule
00:00
Going to work
00:00
Morning assembly
00:00
Morning meeting
00:00
Start work
00:00
lunch
00:00
Cleaning the workplace
00:00
Work resumed
00:00
Work done
Click here for recruitment information and inquiries

Sales / ○○○○○

It is a company that lets you take on challenges without fear of failure.
 
Joined company: 0000 years / Affiliation: ○○ department
 
It has been 00 years since I joined Yamada Seisakusho Co., Ltd.Immediately after joining the company, I was very unsure of what to do, and I was very uneasy.
 
Q. Please tell me the content of your work
Our main business is to publicize our products and services to our customers.We visit our customers and listen to various stories, create proposals, quotations, etc. and make proposals.
 
Q. What was the reason or motivation for choosing this job?
I've been good at communicating since I was a student, and I was very attracted to the sales job, which has many opportunities to interact with people.When I actually work, the sales work is not limited to outside work, but also covers a wide range of tasks such as paperwork and request for proposals.It's hard, but I think it's a rewarding job where you can feel the connection between people.
 
Q. Do you have any memorable episodes or memories that you gained through your work?
High communication skills are required for sales positions, but it is also attractive to create close relationships and trust.I'm very happy when the customer says, "I'm glad I asked Mr. XX," and it also gives me confidence.
 
Q. Please tell me how to spend the holidays
I go out for a drive to eat delicious food with my family.I also like to make plans and I'm excited even before I go out.Of course, my body is my capital, so I try to get a good rest.
 
● Send a message to those who are thinking of applying!
It is a warm workplace where both seniors and juniors can get along well and communicate closely, and can talk about anything.It was my first time to work in sales, but I was able to learn the work while being followed by my seniors, and I am growing every day as a member of society.Let's do our best with us.
● Sales
Daily Schedule
00:00
Business starts
00:00
Whole morning assembly
00:00
Email check, information gathering
00:00
Customer visit
00:00
Lunch time
00:00
Customer visit
00:00
Paperwork
00:00
Business end
Click here for recruitment information and inquiries
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Among the questions we received about recruitment, we will post the most frequently asked inquiries and their answers.If you have any questions other than this answer, please feel free to contact us by using the inquiry form or by phone. (By requesting information, you will not be treated unfavorably in the recruitment selection process.)

Q & A about recruitment

How much knowledge do you need about ○○○○?
Can you return the application documents?
Can you give me a detailed reason for the selection result?
What kind of exam do you have
How many days can you contact me about the hiring results?
Are there any faculties / majors that are advantageous (disadvantageous) in the selection process?

Q & A after joining the company

Is there a trial period
Please tell me about the evaluation system
How often are transfers?
Does my income change based on my abilities and achievements?
How is the assignment done?
What about education?
TEL. 0566-21-1240
We look forward to hearing from you by phone.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Transportation Access

[Address] 〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL. 0566-21-1240
We look forward to hearing from you by phone.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

To all of you who apply

Good friends grow into good organizations.
 
We have gained a track record and trust by proposing products and services that our customers want and providing shapes that match their needs.The achievements and trust that we have cultivated are none other than the gift of the power of each and every staff member.
 
In addition, by fully backing up staff, we are focusing on creating an environment that makes it easier to work and improves skills. It is essential for the development of the organization that each and every staff member can play an active part and exert their full potential.
 
In an environment where you can play an active part with peace of mind, challenging tasks are waiting. I want you to be our friend. 
 
CEO Shinichiro Yamada

The kind of person we are looking for

● People with “positiveness” who can think and execute on their own

In recent years, Japan has various issues such as shrinking economy and declining international competitiveness. Not only perform a given job,Positive people who can think and execute on their ownSeeking.

● Person who can perform business with "flexibility"

Society is made up of people working together and working together. Respect and accept the opinions of people with different interpretations of values, directions, facts and things,Flexible person who can work in a teamSeeking.

● People with “extroversion” from a global perspective

Look outside to catch new information and discover new markets and business possibilitiesExtrovert with a global perspectiveSeeking.
* Staff working at overseas branches are excluded.

At work

New employee training
Seminar room
Meeting room
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
  We, Yamada Seisakusho Co., Ltd., have earned the trust of many customers as a leading company in non-metallic resin presses due to the uniqueness of our field.The products are mainly used for automotive electrical parts and electronic equipment parts.

 We can handle everything from small-scale production such as prototypes to large-scale lot production, and from thin films to thick laminates.In addition, we also manufacture molds in-house, so we can flexibly respond to customer requests in terms of delivery and cost.
We are willing to take on the challenge of processing materials that we have never processed before, so if you have any problems with processing non-metallic materials, please do not hesitate to contact us.
The main materials used are paper phenolic resin laminates, cloth phenolic resin laminates, glass phenolic resin laminates, glass epoxy resin laminates, pressboards, and other films such as PP and PET.
For detailed product shape, please refer to the product photo.

Please select the product part you would like to see

Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

About environmental efforts

We are contributing to the reduction of CO2 emissions through carbon offsetting as an initiative that considers the global environment. Utilizing J-credits created by various activities all over the country, we are contributing to the environment by creating a homepage.


About Carbon Offset

Carbon offset is the effort to reduce greenhouse gases such as carbon dioxide emitted through corporate activities as much as possible, and to absorb and reduce some or all of the emissions that cannot be reduced by purchasing credits elsewhere to make up for it.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd. (hereinafter referred to as "our company") considers the trust of our users to be our number one priority, and we are committed to handling information related to individual users in an accurate and confidential manner. We believe that this is an important responsibility for our company.For this reason, we have established a "Privacy Policy" regarding the personal information of our users, and we will ensure that all employees and affiliated companies are fully aware of how to handle personal information.Its contents are as follows.In addition, regarding the personal information already held and used by our company, we will handle the personal information of users according to this policy.

About Us

Name: Yamada Seisakusho Co., Ltd.
Address: 〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
Name of representative: CEO Shinichiro Yamada

Privacy Policy

(1) Acquisition of personal information

The Company shall collect personal information by lawful and fair means. When asking the user to provide personal information, the Company shall disclose the purpose of collection and the details of use in advance and within the scope of our legitimate business, as far as necessary to achieve that purpose, the Company shall collect personal information.

(2) Use of personal information

The Company shall use the personal information entrusted to it within the scope of obtaining the consent of the person or within the scope of the purpose of use. Regarding the purpose of use, within the scope of the following "the purpose of use", the Company shall use the matters necessary to achieve that purpose within the scope of our legitimate business.

● About the scope of the purpose of use
・ When you contact for business
・ When providing information on products and services handled by the Company
・ When responding to inquiries or requests from users
・ In the case of notifying the user in advance and having obtained their consent

● Use for purposes other than the above
If the Company needs to use the user's personal information for purposes other than the above, the Company shall obtain the user's consent to such use, unless permitted by laws and regulations.

(3) Provision of personal information to a third party

The Company do not provide your personal information to third parties without your consent. However, this does not apply if there are special circumstances such as legal obligations that the Company should obey due to laws and other rules applicable to personal information.

(4) Procedures for disclosure, correction, suspension of use, erasure, etc. of personal information

If you wish to disclose, correct, suspend or erase your personal information (including records provided by a third party) provided by the user, please contact the contact window for inquiries. Regarding disclosure and correction, except as required by laws and regulations, only when it can be confirmed that the request was made by the user himself/herself, the Company shall disclose or correct the personal information of the user within a reasonable period of time. Regarding suspension or deletion of use of personal information, only when there is a reason stipulated by laws and it can be confirmed that the request is made by the user himself/herself, the user's personal information will be suspended or deleted within a reasonable period of time.

(5) Entrustment of handling personal information in foreign countries

Except as required by laws and regulations, when the Company entrusts all or part of the handling of acquired personal information to a third party in a foreign country, the Company shall entrust it after obtaining the consent of the user in advance. When entrusting personal information to a third party in a foreign country, the Company will provide the user with the helpful information about system, measures and others regarding handling of personal information at the entrusted party. In addition, the Company will take measures such as concluding necessary contracts like basic contracts related to entrusting personal information. However, this does not apply if there are special circumstances such as legal obligations that the Company must comply with according to laws and other norms that apply to personal information.

Compliance with laws and regulations regarding the protection of personal information

The Company shall comply with the personal information protection related laws and regulations applicable to the personal information we hold and the guidelines of the Personal Information Protection Commission. In addition, this policy will be judged according to the laws of Japan and other norms. This policy stipulates the basic policy regarding the handling of personal information of the Company, and in accordance with this policy, the Company will endeavor to protect personal information based on laws and norms such as the Act on the Protection of Personal Information.

About safety management measures for personal information

The Company shall protect personal information from unauthorized access to personal information, loss, destruction, falsification, leakage, etc. of personal information, establish a management system to ensure accuracy and safety, and implement appropriate safety measures. In addition to restricting the entry of outsiders into the office where personal information is handled, conducting education and enlightenment activities for all officers and staff involved in the protection of personal information at the Company, the Company shall appoint a manager to manage personal information properly.

Use of cookies and web beacons

The website of the Company uses technologies such as "Cookies" and "Web beacons" to obtain users' access information. None of the information obtained through these methods can identify an individual.

It is possible to use the website with settings that do not accept cookies or display images in your browser, but in that case, some of the functions provided by the website may not be available.

About using Google Analytics

Our website may use Google Analytics. Google Analytics uses cookies to collect access information to our site. In regards to information access and how it is collected and used, the methods are determined by the Google Analytics Service Terms of Serviceas well as the Google Privacy Policy.

Refer to the following page for details.
https://policies.google.com/technologies/partner-sites?hl=ja

In addition, these can be stopped (opt-out) from displaying advertisements at the user's discretion. Please check the following page for how to stop.

About continuous improvement

The Company will continuously review and improve our efforts to protect personal information in order to respond to changes in laws and regulations, handling methods and environmental changes that must be followed in Japan.

Contact Us

For inquiries and complaints regarding the handling of personal information, please contact the following window.
 
[Window for Privacy Policy]
≪Yamada Seisakusho Co., Ltd.≫
〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL: 0566-21-1240 FAX: 0566-21-7851
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Equipment List
Here, we introduce the facilities owned by Yamada Seisakusho.
It is classified into two types: product processing equipment and mold processing equipment.

Product processing equipment

press

Equipment name
Manufacture name
Model
Number of cars owned (units)
crank press
Amada
TP35
4
TP45
1
TP45EX
1
link motion press
Amada
TPL45SI
10
TPL45FX
10
Servo press
Amada
SDE1515I3
1
Komatsu Industries
H1F45CS
2
H1F45CH
2
Link motion press (45t)
Servo press
Servo press (45t)
Servo press (150t)

thomson press

Equipment name
Manufacture name
Model
Number of cars owned (units)
Crank type for Thomson type
Servo press
Akebono Machine Industry
MP-600SL
1
Crank type servo press for Thomson type
Crank type servo press for Thomson type

Dedicated equipment

Equipment name
Manufacture name
Model
Number of cars owned (units)
rotary cutter
Minami Electronics Industry
M1500-200/280 type
2
warp detector
Dedicated equipment
-
29
automatic cutting machine
Dedicated equipment
-
2

Shirring

Equipment name
Manufacture name
Model
Number of cars owned (units)
Shirring
Amada
NS-1235
1
DCT2065
1
M1245
1
Aizawa Iron Works
A3-512
1
AST-512
1
Matsuno Machine Works
MSB4512
1
Shirring

Measuring instrument

Equipment name
Manufacture name
Model
Number of cars owned (units)
microscope
Keyence
VHX-8000
1
Image dimension measuring machine
Keyence
IM8000
1
IM6700/6225
1
IM7000/7020
1
Projector
Nikon
V-16E
1
One-shot 3D shape measuring machine
Keyence
VR-5000
1
microscope
microscope
Image dimension measuring instrument

Other press

Equipment name
Manufacture name
Model
Number of cars owned (units)
die press
Fuji Commerce and Industry
UDP-3000
1
air press
japanese automatic machine
APP100S
1

Others

Equipment name
Manufacture name
Model
Number of cars owned (units)
slitter
Fuji Commerce and Industry
MCS-300
1
drill hole machine
Via Mechanics
ND-6A2226
1
rotary barrel machine
tipton espo
RH 100
1
vibrating barrel machine
tipton espo
CL-100
6
Vacuum decoration molding machine
Fuse Vacuum
NGF-T-0203
1
centrifuge
Tanaka Giken
TBP-12
9
Constant temperature bath
Kato
JMB32
1
Espec
SPHH-202
1
SPHH-302
1
drill hole machine
drill hole machine

Mold processing equipment

Equipment name
Manufacture name
Model
Number of cars owned (units)
Vertical general-purpose milling cutter
Yamazaki Giken
YZ-75
1
NC milling cutter
Yamazaki Giken
YZ-8WR
1
ROBODRILL
FANUC
α-D21LiB5
1
wire cut electrical discharge machine
FANUC
α-0iA
1
α-1iD
1
Seibu Electric
MM50A
1
contour machine
Amada
V-400
1
Electric discharge machine
日立
H-DS02N
1
Small hole processing machine
inter techno
IS-300A
1
mold cleaning machine
Somax
CPIII-66-P15
1
Surface grinding machine
Nagase Integrex
SGW63
1
SGK63
2
lathe
Washino
LR-55A
1
ROBODRILL
ROBODRILL
wire cut electrical discharge machine
wire cut electrical discharge machine
Surface grinding machine
Surface grinding machine
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Materials List
Here we will introduce the materials used by our group companies.
This material can also be handled by Yamada Seisakusho.

Engineering plastic (engineering plastic)

Manufacturer
Material type
Abbreviation
Product name
Material characteristics
Mitsubishi Chemical Advanced Materials Co., Ltd.
Nylon (polyamide)
PA
Tough and has excellent tensile strength, impact resistance, and heat resistance

Polycarbonate
(Polycarbonate)
PC
Excellent transparency, impact resistance, weather resistance, and low water absorption
polyethylene terephthalate
PET
Excellent heat resistance, cold resistance, water resistance, transparency, and chemical resistance.
Polybutylene terephthalate
PBT
Excellent thermal stability, electrical properties (insulating properties), weather resistance, and chemical resistance, and low water absorption.
MC nylon
(monomer cast nylon)
-
Excellent impact resistance, abrasion resistance, and chemical resistance, high heat resistance, and low specific gravity.
super cast nylon
MCN
Excellent impact resistance, abrasion resistance, and chemical resistance, high heat resistance, and low specific gravity.
cast nylon
CN

Excellent impact resistance, abrasion resistance, and chemical resistance, high heat resistance, and low specific gravity.
Polyacetal
POM
Mechanical properties, wear resistance,Excellent organic solvent resistanceIt has excellent properties, is difficult to break, is tough, and has an excellent elastic recovery rate, making it difficult for creep phenomenon (deformation) to occur.
Polyacetal
(POM Super)
-

Low distortion grade of POM
Less deformation than normal grade
semitron
-
Antistatic grade of POM


-
-
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Hiring new graduates (regular employees)

Employment status
Permanent
Qualifications
Expected to graduate (complete) in March 0000
Job category
Design development, production / manufacturing technology, sales
Salary
000,000 yen ~ 000,000 yen
Benefits
Qualification allowance / night shift allowance / housing allowance / commuting allowance / overtime allowance / year-end and new year allowance
Salary increase
Regular salary increase 1 times a year
Bonus
Twice a year (June / December)
Location
○○ city ○○ town
Working hours
00:00 to 00:00 (1 hour break)
Days off and leave
4 week 8 holiday (about 9 days a month)
New Year holidays / Paid leave / Condolence leave / Special leave / Obon vacation / Sunday / Holiday
Treatment and benefits
Complete social insurance / Full payment of transportation expenses / Retirement payment system available
Remarks
You can also apply by phone.
Yamada Seisakusho Co., Ltd. TEL: 0566-21-1240
(Reception hours weekdays 00:00 to 00:00)
Please feel free to contact us with any questions.

Application Form

In applying

■ Please read the "Privacy Policy" when applying and making inquiries about the application.
■ Inquiries about the application may take time to answer. If you are in a hurry, please feel free to contact us by phone.
Yamada Seisakusho Co., Ltd. Tel: 0566-21-1240

Precautions regarding input

  1. * Marks are required items.please be sure to input.
  2. Please enter all katakana in full-width characters.
  3. Please be sure to enter a contact phone number (home or mobile phone) in the phone number field.
  4. When you have finished entering the information, click "Confirm" at the bottom of the form.
  5. The content confirmation screen will open. After confirming the input content, click "Send" to complete.
Name  ※Required
Example: Taro Yamada
Spelling  ※Required
Example) Taro Yamada
Sex
age
age
Address
Postal Code 
Phone
Example) 012-345-6789 * Mobile phones are available
E-mail address  ※Required



Note) Only single-byte alphanumeric characters
Desired occupation  ※Required
Motivation and appeal points / others  ※Required
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Career recruitment (regular employee)

Employment status
Permanent
Qualifications
More than XNUMX years of work experience in each occupation
Job category
Sales, mold technicians, machine operators
Salary
000,000 yen ~ 000,000 yen * Preferential treatment according to our regulations in consideration of experience and ability
Benefits
Qualification allowance / night shift allowance / housing allowance / commuting allowance / overtime allowance / year-end and new year allowance
Salary increase
Regular salary increase 1 times a year
Bonus
Twice (June / December)
Location
Main office
Working hours
00:00 to 00:00 (1 hour break)
Days Off
4 week 8 holiday (about 9 days a month) 
New Year holidays / Paid leave / Condolence leave / Special leave / Obon vacation / Sunday / Holiday
Treatment and benefits
Complete social insurance / Full payment of transportation expenses / Retirement payment system available
Remarks
You can also apply by phone. 
Yamada Seisakusho Co., Ltd. TEL: 0566-21-1240 (Reception hours weekdays 00:00-00:00) 
Please do not hesitate to contact us with any questions.

Application Form

In applying

■ Please read the "Privacy Policy" when applying and making inquiries about the application.
■ Inquiries about the application may take time to answer. If you are in a hurry, please feel free to contact us by phone.
Yamada Seisakusho Co., Ltd. Tel: 0566-21-1240

Precautions regarding input

  1. * Marks are required items.please be sure to input.
  2. Please enter all katakana in full-width characters.
  3. Please be sure to enter a contact phone number (home or mobile phone) in the phone number field.
  4. When you have finished entering the information, click "Confirm" at the bottom of the form.
  5. The content confirmation screen will open. After confirming the input content, click "Send" to complete.
Name  ※Required
Example: Taro Yamada
Spelling  ※Required
Example) Taro Yamada
Sex
age
age
Address
Postal Code 
Phone
Example) 012-345-6789 * Mobile phones are available
E-mail address  ※Required



Note) Only single-byte alphanumeric characters
Desired occupation  ※Required
Motivation and appeal points / others  ※Required
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
We will deliver the real voices of senior staff who are active on the stage of Yamada Seisakusho Co., Ltd. right now.We asked them to tell us about their work, their charms, and what they find rewarding.

Production / Manufacturing Technology / ○○○○○

To the company's stance of pursuing only one products and manufacturing technologyI applied because I felt the future.
 
Joined company: 0000 years / Affiliation: ○○ department
 
At Yamada Seisakusho Co., Ltd., the atmosphere of all the staff is warm and lively, making it a very comfortable place to work.Every day I realize that this is a place where if you have a willingness to learn, you will be recognized.
 
Q. Please tell me the content of your work
I am in charge of machine maintenance in the XX department.Specific work includes aligning machines, changing tools, and checking dimensions.
 
Q. What was the reason or motivation for choosing this job?
Originally I liked making things, and from an early age I was interested in detailed work.When I was a student, I took a tour of a factory that handles automobile parts, and I felt the wonder of the manufacturing industry, so I chose this job.
 
Q. Do you have any memorable episodes or memories that you gained through your work?
I usually only work in the factory, so I didn't have much of an image of the shipped products.However, one time when I opened a store at an exhibition, I was able to attend for the first time, and I was even more delighted when the customer took a look at the product with great interest.
 
Q. Please tell me how to spend the holidays
Since I belong to a soccer team made by my comrades in the company, I go to practice and games on weekends.It's an important time because I can forget about my daily work and refresh myself.
 
● Send a message to those who are thinking of applying!
It is a company where all employees can work together toward the same goal.We are waiting for someone who can work with us and share the joy of growing up.
● Production / manufacturing technology
Daily Schedule
00:00
Going to work
00:00
Morning assembly
00:00
Morning meeting
00:00
Start work
00:00
lunch
00:00
Cleaning the workplace
00:00
Work resumed
00:00
Work done
Click here for recruitment information and inquiries

Sales / ○○○○○

It is a company that lets you take on challenges without fear of failure.
 
Joined company: 0000 years / Affiliation: ○○ department
 
It has been 00 years since I joined Yamada Seisakusho Co., Ltd.Immediately after joining the company, I was very unsure of what to do, and I was very uneasy.
 
Q. Please tell me the content of your work
The main task is to promote products and services to customers.We make proposals by visiting our customers and listening to various stories, creating proposals, quotations, etc.
 
Q. What was the reason or motivation for choosing this job?
I've been good at communicating since I was a student, and I was very attracted to the sales job, which has many opportunities to interact with people.When I actually work, the sales work is not limited to outside work, but also covers a wide range of tasks such as paperwork and request for proposals.It's hard, but I think it's a rewarding job where you can feel the connection between people.
 
Q. Do you have any memorable episodes or memories that you gained through your work?
High communication skills are required for sales positions, but it is also attractive that close human relationships and trust are created along with it.It makes me very happy when a customer says, "I'm glad I asked Mr. XX," and it gives me confidence.
 
Q. Please tell me how to spend the holidays
I go out for a drive to eat delicious food with my family.I also like to make plans and I'm excited even before I go out.Of course, my body is my capital, so I try to get a good rest.
 
● Send a message to those who are thinking of applying!
It is a warm workplace where both seniors and juniors can get along well and communicate closely, and can talk about anything.It was my first time to work in sales, but I was able to learn the work while being followed by my seniors, and I am growing every day as a member of society.Let's do our best with us.
● Sales
Daily Schedule
00:00
Business starts
00:00
Whole morning assembly
00:00
Email check, information gathering
00:00
Customer visit
00:00
Lunch time
00:00
Customer visit
00:00
Paperwork
00:00
Business end
Click here for recruitment information and inquiries
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

An existing supplier is looking for an alternative supplier due to delivery difficulties.

I'm confused about ○○
I'm confused about ○○

Customers who are looking for a processing destination that is difficult for other companies to realize.

I'm confused about ○○
I'm confused about ○○
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Materials List
Here, we introduce the materials used by Yamada Seisakusho.

Paper/Pressboard

Types
Product name
Use
特性
oil sheet
#500 (Fuji Oil S)
water, oil, fuel, etc.
Sealing materials, machine parts, etc.
Oil resistance,
Heat-resistant,
Cold resistance etc.
beater sheet
AF-74 (Vita S)
Vulcanized fiber
HB-77R (red)
HB-77B (black)
Press board
PB-2
special fiber board
Pasco E

resin laminate

Types
Product name
Use
特性
Paper-based phenolic resin laminated board
PS-1131
Automotive electrical parts,
base etc.
high temperature,
Heat resistance, etc.
depends on material
PS-1135
PS-1143 (L/S)
PS-1160G
PL-1131
Cloth base material Phenol resin laminated board
PS-2162
PS-2164
PL-1621
PL-FLE-P
Glass-based phenolic resin laminate
PS-3130A
PS-3753
PL-1762
PL-1764
NL-PG
PGP-6132
Glass base epoxy resin laminate
ES-3230J
ES-3753K
EL-3762

films

Types
Product name
Use
特性
PP
Polysame
electronic and electrical equipment parts,
electrical insulation,
For mold release, etc.
electrical insulation,
Heat-resistant,
chemical resistance, etc.
depends on material
PET
Elecrysta
dialamy
Therapeel
Torelina 5000
lumirror
PI
Kapton
PC
D02
Iupilon
polycarbonate ace
Nylon
TPS N6
TPS N66
poly slider

Others

Types
Product name
Use
特性
heat resistant tube
irlux tube
Electrical wire,
harness protection,
electrical insulation,
Gaskets, sealing materials, etc.
electrical insulation,
Heat-resistant,
Oil resistance, etc.
soft mica
D581A
hard mica
D581
Cork board
Cortex

tapes

Types
Product name
Use
特性
Double-sided tape
No.752
general industrial use,
foam lamination,
For nameplate fixing, etc.
electrical insulation,
Heat-resistant,
Weatherability,
chemical resistance, etc.
No.7787
632S3
5600S
No.500
No.501L
No.5000N
No.5015
#735A
We also handle many other materials, so please feel free to contact us.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

17 goals of SDGs

Zero hunger
End hunger, achieve food security and improved nutrition and promote sustainable agriculture
Health and welfare for all
Ensure healthy lives and promote well-being for all at all ages
High quality education for everyone
Provide inclusive and equitable quality education and promote lifelong learning opportunities for all
Achieve gender equality
Achieve gender equality and empower all women and girls
Safe water and toilets around the world
Ensuring access to water and sanitation and sustainable management for all
Let's get rid of poverty
End poverty in all its forms everywhere
Affordable and clean energy
Ensure access to affordable, reliable, sustainable and modern energy for all
Job satisfaction and economic growth
Promote sustained, inclusive and sustainable economic growth, full and productive employment and decent work for all
Let's lay the foundation for industry and technological innovation
Build resilient infrastructure, promote inclusive and sustainable industrialization, and foster innovation
Eliminate inequality between people and countries
Reducing inequalities within and between countries
Town development that allows you to continue living
Make cities and human settlements inclusive, safe, resilient and sustainable
Responsibility to produce Responsibility to consume
Ensure sustainable consumption and production patterns
Take concrete measures against climate change
Take urgent action to combat climate change and its impacts
Let's protect the richness of the sea
Conserve and sustainably use the oceans and marine resources for sustainable development
Let's protect the richness of the land
Protect, restore and promote sustainable use of terrestrial ecosystems, sustainably manage forests, combat desertification, reverse and reverse land degradation, and combat biodiversity loss
Peace and justice for all
Promote peaceful and inclusive societies for sustainable development, provide access to justice for all and build effective, accountable and inclusive institutions at all levels
Achieve your goals in partnership
Strengthen the means of implementation and revitalize the global partnership for sustainable development

Sentence (+image)

Ah ah ah ah

SDGs Initiatives

Yamada Seisakusho Co., Ltd. aims to contribute to the achievement of SDGs through corporate activities.

What are SDGs (Sustainable Development Goals)?

SDGs are "Sustainable Development Goals", which are international goals adopted at the United Nations Summit in 2015/9 and are applied up to 2030.

Under the vow of "leave no one behind," the action plans for humans, the planet and prosperity include "poverty," "health and welfare," "education," "motivation," and "climate." It consists of 17 goals and 169 targets.

The SDGs are universal, not only in developing countries but also in developed countries themselves, and are being actively pursued in Japan.

Company Initiatives

Main initiatives

As a member of the local community, we will actively engage in social contribution activities, aiming to create a prosperous and comfortable city that will lead to the next generation and to develop the region.
Community cleanup activities
Tree planting activity
On-site experience tour
Company tour

activity report

In addition to these activities, we also carry out various activities, and we also support and cooperate with local events held every year.
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

Career recruitment (regular employee)

Employment status
Permanent
Qualifications
Forward-looking and able to work collaboratively with others
Job category
Technology development, mold making
Salary
High school graduate 190,000 yen ~
University graduate from 200,000 yen
 * Preferential treatment according to our regulations in consideration of experience and ability
Benefits
Housing allowance / family allowance / qualification allowance / commuting allowance / overtime allowance
Salary increase
Regular salary increase once a year (April)
Bonus
Twice (June / December)
Location
Main office
Working hours
8:15-17:00 (45 minute break)
Days off and leave
Annual holidays XNUMX days (XNUMX days each during GW, Obon, and New Year holidays)
Paid vacation / Special vacation
Treatment and benefits
Fully equipped with social insurance (employment, workmen's accident, health, welfare pension) / Retirement allowance system available /
Remarks
We are currently recruiting for jobs at ○○○.
For details, please check the website of ○○○.

If you have any questions, please feel free to contact us.
Yamada Seisakusho Co., Ltd. Recruitment: Yamada TEL: 0566-21-1240

Application Form

In applying

■ Please read the "Privacy Policy" when applying and making inquiries about the application.
■ Inquiries about the application may take time to answer. If you are in a hurry, please feel free to contact us by phone.
Yamada Seisakusho Co., Ltd. Tel: 0566-21-1240

Precautions regarding input

  1. * Marks are required items.please be sure to input.
  2. Please enter all katakana in full-width characters.
  3. Please be sure to enter a contact phone number (home or mobile phone) in the phone number field.
  4. When you have finished entering the information, click "Confirm" at the bottom of the form.
  5. The content confirmation screen will open. After confirming the input content, click "Send" to complete.
Name  ※Required
Example: Taro Yamada
Spelling  ※Required
Example) Taro Yamada
Sex
age
age
Address
Postal Code 
Phone
Example) 012-345-6789 * Mobile phones are available
E-mail address  ※Required



Note) Only single-byte alphanumeric characters
Desired occupation  ※Required
Motivation and appeal points / others  ※Required
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 

We are not currently recruiting.

We are very sorry, but we are not currently recruiting for all positions.
When we are recruiting, we will inform you on our website.

Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Products/Technologies/Equipment
Products/Technologies/Equipment
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Yamada Seisakusho Co., Ltd.
〒448-0813
1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL.0566-21-1240
FAX: 0566-21-7851
Precision small press parts and mold manufacturing
 
Notices
With materials and techniques that are rare in Japan,
Manufacturer of various auto parts.
Rare Materials And Technologies
Notices
Topics
Aiming for “good manufacturing” that pleases customers
What Nihon Sample Mfg. Co., Ltd. has always maintained since its founding is the attitude of responding to customer needs by balancing the required "quality" and "speed."
Our automotive parts manufacturing technology, which we specialize in, is highly evaluated for its durability, safety, high quality, and cost.In addition to prototypes, we can respond quickly to small-lot production and custom-made products.

All of our employees will continue to push forward with the aim of "making good products" that pleases our customers.
Aiming for “good manufacturing” that pleases customers
What Nihon Sample Mfg. Co., Ltd. has always maintained since its founding is the attitude of responding to customer needs by balancing the required "quality" and "speed."
Our automotive parts manufacturing technology, which we specialize in, is highly evaluated for its durability, safety, high quality, and cost.In addition to prototypes, we can respond quickly to small-lot production and custom-made products.

All of our employees will continue to push forward with the aim of "making good products" that pleases our customers.
Yamada Seisakusho Co., Ltd.
Yamada Seisakusho contributes to solving problems.
Message from our CEO
Tell us a little more about your project?
Message from our CEO
Leveraging our superiority in technology and know-how to become an indispensable company
Yamada Seisakusho was founded in 1955 as a dial processing company for automobile meters. As a leading company in non-metallic resin presses, mainly processing bakelite, Yamada Seisakusho supplies a large number of products such as resin pressed parts and insulator processed parts to the automobile industry. I have delivered.Bakelite processing uses a variety of materials, including paper and cloth base materials, as well as our mainstay glass base materials, and is also used in automotive electrical and electronic equipment parts, and in recent years, electric vehicle parts. We appreciate your continued patronage.
There are not many companies in Japan that mainly manufacture insulation parts such as bakelite processing, but while making the most of its superiority, we are not content with domestic demand, and are also considering globalization, such as sending overseas.Don't forget to take on challenges and tackle the diversifying needs of our customers with a variety of approaches.And to become an indispensable company not only in Japan but also in the world.In the 66 years since our founding, we will continue to move forward as a company that can contribute to our customers by responding to the needs of the times with our technological capabilities and know-how.
CEO Shinichiro Yamada
Message from our CEO
Message from our CEO
Main products

Cutting/bending/drilling parts

Features

We deliver high-quality products through processing using various NC lathe machines, laser cutting, and finishing by technicians.

Main uses

General sheet metal, gears, hydraulic parts, aircraft, sashes, guardrails

Piping and joint parts products

Features

We use high-quality materials to manufacture high-performance, high-quality products.We perform the most suitable anti-corrosion treatment according to the application.

Main uses

Oil line pipes, water supply and sewage, factory water pipes, various plant pipes

precision machined parts

Features

Please feel free to contact us regarding materials that are difficult to cut and fine processing such as etching.Utilizing our advanced processing technology, we provide high-precision products.

Main uses

Lead frames, high-precision filters, jigs, filters, encoders
Main products

Piping and joint parts products

Features

We use high-quality materials to manufacture high-performance, high-quality products.We perform the most suitable anti-corrosion treatment according to the application.

Main uses

Oil line pipes, water supply and sewage, factory water pipes, various plant pipes

precision machined parts

Features

Please feel free to contact us regarding materials that are difficult to cut and fine processing such as etching.Utilizing our advanced processing technology, we provide high-precision products.

Main uses

Lead frames, high-precision filters, jigs, filters, encoders
Our strengths
Strength
We, Yamada Seisakusho, are a pressed parts manufacturer that develops and manufactures our own products using our own technology.Our products have been adopted by leading Japanese manufacturers such as Denso and Panasonic for their high technological capabilities and know-how that we have accumulated over many years.
POINT01
increasingly needed
Our company deals with parts that are indispensable for the electrification of vehicles, such as insulators and electronic parts.With the spread of electric vehicles, new needs will arise, and we have the technology to easily meet those needs.
POINT02
less competition
We handle special materials such as resin, paper, and non-ferrous metals.Because unique technology and know-how are required, there are few new entrants and competitors.
POINT03
Uses other than automobiles
In fact, it is a versatile technology, so in recent years we have received orders for other than cars.There are inquiries in a wide range of fields such as aircraft and cameras.
Technology/Equipment

Lathe/milling machine

Various processing can be performed by cutting using many cutting edges.It is possible to process small lots that are difficult to handle with a machining center.

Equipment details

Intelligent multitasking machine (MULTUS U30)……2 units
High-precision normal lathe (MSA50-20)……1 unit
CNC precision automatic lathe (MEGA III-400)……2 units

Machining center/fine processing machine

Based on the machining data created from the drawing, you can automatically cut into a shape that combines circles and squares.

Equipment details

XNUMX-axis machining center(MAM72-35V)……2 units
Vertical machining center(MSA50-20)……1 unit
High-precision, high-speed, small-diameter fine processing machine(MEGA III-400)……2 units

Laser processing machine, welding machine, others

High-quality welding that was impossible with conventional methods is automatically performed by combining it with robot technology.We can handle products with long lengths, large plates, and complicated shapes.

Equipment details

CNC fiber laser compound machine(TruMatic 1000 fiber)……2 units
YAG laser spot welder(ML-2050A)……2 units
bending machine(TruBend 5085)……1 unit
Technology/Equipment

Lathe/milling machine

Various processing can be performed by cutting using many cutting edges.It is possible to process small lots that are difficult to handle with a machining center.

Equipment details

Intelligent multitasking machine (MULTUS U30)……2 units
High-precision normal lathe (MSA50-20)……1 unit
CNC precision automatic lathe (MEGA III-400)……2 units

Machining center/fine processing machine

Based on the machining data created from the drawing, you can automatically cut into a shape that combines circles and squares.

Equipment details

XNUMX-axis machining center(MAM72-35V)……2 units
Vertical machining center(MSA50-20)……1 unit
High-precision, high-speed, small-diameter fine processing machine(MEGA III-400)……2 units

Laser processing machine, welding machine, others

High-quality welding that was impossible with conventional methods is automatically performed by combining it with robot technology.We can handle products with long lengths, large plates, and complicated shapes.

Equipment details

CNC fiber laser compound machine(TruMatic 1000 fiber)……2 units
YAG laser spot welder(ML-2050A)……2 units
bending machine(TruBend 5085)……1 unit
Application guidelines / application form
Requirements/Entry
We are looking for a partner to work with
Because it is a relatively lightweight product, Roughly half male to female.
In addition, we have realized full-time employment for all employees, including female employees who return to work after giving birth or raising children.
In addition, we will respond flexibly to customer requests.
Please feel free to contact us.

Information for online consultation
If you want to see more detailed information, you can also consult online.
Our online consultation does not require any dedicated equipment or software installation.
Anyone with an internet connection, a computer, smartphone, tablet, or other device and a browser can use it easily.

Click here for other questions and inquiries
TEL.0566-21-1240
In addition, we will respond flexibly to customer requests.
Please feel free to contact us.

Information for online consultation
If you want to see more detailed information, you can also consult online.
Our online consultation does not require any dedicated equipment or software installation.
Anyone with an internet connection, a computer, smartphone, tablet, or other device and a browser can use it easily.

Click here for other questions and inquiries
TEL.0566-21-1240
01
Material
We can handle everything from thin films to thick laminated boards. We also manufacture dies in-house, so we can flexibly respond to customer requests in terms of delivery time and cost. We are willing to take on the challenge materials that have never been processed. If you have any problems in processing non-metal materials, please feel free to contact us.
Processable Material
  • Glass cloth base material Epoxy resin laminated board
  • Glass cloth phenol resin laminated board
  • Paper-based phenolic resin laminated board
  • Cloth base material Phenol resin laminated board
  • Press board
  • PEEK (super engineering plastic)
  • Aramid paper
  • 6 nylon
  • Vulcanized fiber
  • Polypropylene
  • Polyimide
  • Polyester film
  • Polycarbonate
  • Double-sided tape
02
Technology
Our specialty is non-metal resin presses. We have earned the trust of many customers due to the peculiarities of the field. Molds are the cornerstone of our technology. We also manufacture the dies in-house. We have been working on various materials so far, and we have incorporated the technology cultivated in the past into the small mold.
About dies <Design, manufacture and development are possible>
  • Dies for punching (blanking) processing
  • Bending-processed dies
  • Drawn processing dies
  • Dies for half-cut processing, etc.
Highly productive processing technology
  • Press processing utilizing the above 4
  • Laminator processing
  • Shirring (cutting) processing
  • Vacuum forming (decoration)
  • Resin cutting
  • Double-sided tape joining
  • Press-fit
03
Inquiry content from our new clients
Customers who are looking for alternatives because of existing suppliers' difficulty in delivery (including quality and cost response).
Customers who are looking for a processing destination that is difficult for other companies to realize.
Customers who are looking for a company that can process refused by other companies.
Customers who are looking for a company that can procure difficult materials. 
Customers who are looking for a processing destination that can achieve short delivery time and handle small lots to large lots.
Yamada Seisakusho Co., Ltd.
Yamada Seisakusho Co., Ltd.
YAMADA INDUSTRY
〒448-0813 1-18 Otsuzaki, Ogakie-cho, Kariya-shi, Aichi
TEL
0566-21-1240
Company Profile
ABOUT US
Contribute to
society through manufacturing
and human resource development.
Yamada Seisakusho, which was founded in the dial processing of automobile meters, is a leading non-metal resin press company that mainly processes bakelite, and has delivered a large number of products such as resin stamped parts and insulator processed parts to the automobile industry. There are not many companies in Japan that mainly manufacture insulating parts such as bakelite processing, but while taking advantage of this, we are not content with domestic demand and are considering globalization such as overseas transmission. We don't forget to take on challenges and take a variety of approaches to meet the diversifying needs of our customers. We will become an "indispensable company" not only for Japan but also for the world. It has been 66 years since our founding, and we will continue to be a company that can contribute to our customers by responding to the needs of the times with our technological capabilities and know-how.
Back to TOP